EasyManua.ls Logo

GE PTAN9150MWW - Final Spin Cycle Explained

GE PTAN9150MWW
54 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
25
Final Spin
Washer start draining until "minimum" level is reached.
After level is reached, washer starts spinning basket, ramping up to
400 RPM
Washer then slows down to 230 RPM, then ramps up to spin speed
selected by consumer
If washer CANNOT reach desired spin speed, motor shut off until
speed reaches 300 RPM
After reaching 300 RPM, washer attempts to ramp up to final spin
speed again.
If successful, spin lasts approx 16 minutes total
If UNSUCCESSFUL at attaining desired spin speed BUT unit has only
performed 1 Deep Rinse, washer does another Deep Rinse cycle.
If UNSUCCESSFUL at attaining desired spin speed AND unit has al-
ready performed 2 deep rinses, washer stops and an error code is
logged. (See codes page 55)

Related product manuals