C
Courtney ReynoldsAug 29, 2025
Why do the clock and timer not work on my GE Ranges?
- SSteven BaxterAug 29, 2025
If the clock and timer on your GE Ranges do not work, replace the fuse or reset the circuit breaker.
To Next PageTo Next PageWhy do the clock and timer not work on my GE Ranges?
If the clock and timer on your GE Ranges do not work, replace the fuse or reset the circuit breaker.
How to fix GE RGBS330 burners that do not light?
If your GE Ranges burners do not light, ensure the electrical plug is properly inserted into a grounded outlet. Also, check if a fuse in your home may be blown or the circuit breaker tripped, and replace the fuse or reset the circuit breaker. Additionally, make sure the gas supply is connected and turned on. Ensure burner parts are correctly replaced, and remove the burners and clean them if the burner slots near the electrode or the round lighter port on the oval burner are clogged. Lightly polish flat tip of electrode with nail file or sandpaper until shiny if there is food residue on electrode.
What to do if my GE RGBS330 has excessive smoking during broiling?
If you experience excessive smoking while broiling in your GE Ranges, lower the rack position of the food.
How to fix a GE RGBS330 Ranges drawer that doesn't slide smoothly?
If the drawer on your GE Ranges does not slide smoothly or drags, fully extend the drawer and push it all the way in to ensure it's aligned. Reduce weight or redistribute contents if the drawer is overloaded or the load is unbalanced.
Why does my GE Ranges oven door glass look tinted?
This is normal for new GE Ranges. The inner oven glass has a heat barrier to reflect heat back into the oven, which may cause a tinted or rainbow color under certain light or angles.
Why is my GE RGBS330 oven not clean after the self-clean cycle?
If your GE Ranges oven is not clean after a clean cycle, it could be due to improperly set oven controls or a heavily soiled oven. Clean up heavy spillovers before starting the clean cycle. Heavily soiled ovens may need to self-clean again.
What to do if my GE RGBS330 is smoking too much during the clean cycle?
If you experience excessive smoking during the self-clean cycle of your GE Ranges, it's likely due to excessive soil or grease. To resolve this, turn the Oven Temperature Knob to OFF, wait for the oven to cool below the unlocking temperature, open the windows to rid the room of smoke, wipe up the excess soil, and then reset the clean cycle.
What to do if my GE Ranges clock and timer do not work?
If the clock and timer on your GE Ranges aren't working, a fuse in your home may be blown, or the circuit breaker tripped. Replace the fuse or reset the circuit breaker.
What to do if my GE RGBS330 Ranges oven will not self-clean?
If your GE Ranges oven will not self-clean, it could be due to a couple of reasons. The temperature may be too high, so allow the oven to cool and reset the controls. Also, the oven controls may be improperly set.
What to do if my GE RGBS330 Ranges oven appears not to work?
If your GE Ranges oven appears not to work, there are a couple of things you can check. First, a fuse in your home may be blown, or the circuit breaker tripped, so replace the fuse or reset the circuit breaker. Also, make sure the oven controls are properly set. If this does not solve the issue, verify that the oven is not in Sabbath Mode.
General