Why does my GE RGBS330 Ranges oven door glass appears to be "tinted" or have a "rainbow" color?
The "tinted" or "rainbow" color on your GE Ranges oven door glass is normal. The inner glass is coated with a heat barrier to reflect heat and keep the outer door cool.
What to do if my GE Ranges burners do not light?
If the burners on your GE Ranges aren't lighting, there are several potential causes: * The battery may be weak or dead (for cordless ranges), so replace the battery. * The plug on the range may not be fully inserted, so ensure it's plugged into a properly grounded outlet. * The gas supply may not be connected or turned on, so check the Installation Instructions. * A fuse in your home may be blown or the circuit breaker tripped, so replace the fuse or reset the circuit breaker. * Burner parts may not be replaced correctly, so refer to the Care and Cleaning section. * Burner slots may be clogged, so remove and clean the burners, checking for burned-on food or grease. * There may be food residue on the electrode, so lightly polish the flat tip of the electrode with a nail file...
Why do my GE RGBS330 burner flames appear very large or yellow?
Very large or yellow burner flames on your GE Ranges indicate an improper air to gas ratio. If your range is connected to Propane gas, contact the technician who installed your range or made the conversion.
What to do if my GE Ranges appears not to work?
If your GE Ranges appears not to work, replace the fuse or reset the circuit breaker.
What to do if my GE RGBS330 Ranges oven appears not to work?
If your GE Ranges oven appears not to work, there are a couple of things you can check. First, a fuse in your home may be blown, or the circuit breaker tripped, so replace the fuse or reset the circuit breaker. Also, make sure the oven controls are properly set. If this does not solve the issue, verify that the oven is not in Sabbath Mode.
What to do if my GE RGBS330 Ranges oven will not self-clean?
If your GE Ranges oven will not self-clean, it could be due to a couple of reasons. The temperature may be too high, so allow the oven to cool and reset the controls. Also, the oven controls may be improperly set.
What to do if my GE Ranges clock and timer do not work?
If the clock and timer on your GE Ranges aren't working, a fuse in your home may be blown, or the circuit breaker tripped. Replace the fuse or reset the circuit breaker.
What to do if my GE RGBS330 is smoking too much during the clean cycle?
If you experience excessive smoking during the self-clean cycle of your GE Ranges, it's likely due to excessive soil or grease. To resolve this, turn the Oven Temperature Knob to OFF, wait for the oven to cool below the unlocking temperature, open the windows to rid the room of smoke, wipe up the excess soil, and then reset the clean cycle.
How to stop excessive smoking when broiling in my GE Ranges?
If your GE Ranges is smoking excessively during broiling, the food is likely too close to the burner element. Lower the rack position of the food to increase the distance from the burner.
Why aren't the clock and timer working on my GE RGBS330 Ranges?
If the clock and timer on your GE Ranges do not work, check the fuse in your home or the circuit breaker. Replace the fuse or reset the circuit breaker if needed.
To Next Page
General