GE T1000 User Manual

Chapter 7 – Configuration
GE Reason Switches
REASON SWITCHES-TM-EN-3
147
HTTPS connection, and certification generation and status can be configured at this
menu. Possible configurations are as follows.
o Mode: select if HTTPS should be enabled or not. Allowed values are
as follows:
 Enabled: enable the HTTPS protocol usage as access and
configuration interface;
 Disabled: disable the HTTPS protocol usage as access and
configuration interface.
o Automatic Redirect: select if HTTP connections should be
automatically redirected to HTTPS connections. Allowed values are
as follows:
 Enabled: enable the HTTPS protocol usage as access and
configuration interface;
 Disabled: disable the HTTPS protocol usage as access and
configuration interface.
o Certificate Maintain: select which mode should be used to
maintain HTTPS certification. Only allowed when Mode is disabled.
 None: no action to maintain certification will be done;
 Delete: delete certification;
 Upload: upload the certification. If allowed, the
PassPhrase, Certificate Upload and File Upload fields will
appear. Possible values are as follows.
o PassPhrase: type the pattern that will be used for encrypting the
certification;
o Certificate Upload: select certification upload method. Possible
modes are Web Browser and URL. Possible configurations are as
follows:
 Web Browser: certificate upload is done via Web Browser.
When using this method, it is necessary to upload a valid
Web Browser file to do certification upload at the File
Upload row;
 URL: certificate upload is done through a given address.
When using this method, it is necessary to type the URL to
be used at the URL row, using the following methodology:
<protocol>://[<username>[:<password>]@]<
host>[:<port>][/<path>];

GE T1000 Specifications

General

Brand	GE
Model	T1000
Category	Switch
Language	English