GE T1000 User Manual

Chapter 7 – Configuration
GE Reason Switches
REASON SWITCHES-TM-EN-3
153
o Delete: click at the button to delete the filter at the row;
o Engine ID: indicates the engine ID used by the user. Engine ID
equal to switch engine ID means local user, and different engine ID
means remote user. Engine ID number must be inserted in
hexadecimal format;
o User Name: indicates the name of the user configured at the given
engine ID. Maximum community name length is 32, and allowed
characters are the ASCII characters from 33 to 126 (basically
letters, numbers and other characters, such as “-“ or “_”);
o Authentication Protocol: select the protocol which will be used to
authenticate the user. Possible values are as follows.
 None: No authentication protocol is used on this user;
 MD5: MD5 protocol is used to authenticate this user.
Enabling this field allows the switch to create a flag to
indicate this protocol usage;
 SHA: SHA protocol is used to authenticate this user.
Enabling this field allows the switch to create a flag to
indicate this protocol usage.
o Authentication Password: the password that will be used to
identify this user. Password length for MD5 protocol should be from
8 to 32 characters, and for SHA protocol should be from 8 to 40
characters. Allowed characters are the ASCII characters from 33 to
126 (basically letters, numbers and other characters, such as “-“ or
“_”);
o Privacy Protocol: select the privacy protocol that this entry will
participate. Possible values are as follows.
 None: No privacy protocol is used on this user;
 DES: DES protocol is used. Enabling this field allows the
switch to create a flag to indicate this protocol usage;
 AES: AES protocol is used. Enabling this field allows the
switch to create a flag to indicate this protocol usage.
o Privacy Password: the password that will be used to identify this
user. Password length should be from 8 to 32 characters. Allowed
characters are the ASCII characters from 33 to 126 (basically
letters, numbers and other characters, such as “-“ or “_”);
After one of the configurations described before is changed, there are two buttons
that allow the user to save or discard the configurations.
o Save: save configuration at the Running Config;

GE T1000 Specifications

General

Brand	GE
Model	T1000
Category	Switch
Language	English