GE UVis-920 - Page 41

Return to main menu
Pressing Esc repeatedly, always returns to the main menu and the main operating win-
dow.
Main operating
Setup
ESC ESC ESC ESC
ESC
Check
Select value
A cursor below a text or numerical value shows what is affected by a key. To increase
the value press arrow up key. To decrease the value press arrow down key.
1
2
3
FunctionPart
Parameter1
Current value2
New value to be set3
The text or numerical value displayed is accepted by pressing the OK key. To cancel,
press the Esc key.
If the new value to be set is within brackets, it is possible to select between a number of
preset values. No brackets make it possible to select step by step within a preset range,
for example 0-999.
Monitor UVis-920 Operating Instructions 29055049 AD 41
5 Operation
5.1 Menu selection
5.1.2 Menu navigation