GE UVis-920 - Calibration and Flow Cell Changing

DisplayActionStep
Select menu Filter Used Time. If the filter used time
is > 2500 hours, it is recommended to change the
filter.
2
Lamp used time
DisplayActionStep
Select menu Check, press OK.1
Select menu Filter Used Time, press OK.2
If the lamp used time is > 4000 hours, contact GE for
lamp replacement.
3
Stop the test by pressing Esc.4
Software version
DisplayActionStep
Select menu Check, press OK.1
Select menu Software version.2
5.10 UV cell calibration
For exact measurements of the nominal flow cell path length, the path length in the UV
flow cell can be calibrated. This is not necessary for standard operations.
Call GE for advice.
52 Monitor UVis-920 Operating Instructions 29055049 AD
5 Operation
5.9 Check menu