GE
Sensing
EC DECLARATION
OF
CONFORMITY
DOC-0025, Rev. A
We, GE Sensing
1100 Technology Park Drive
Billerica, MA 01821
USA
declare under our sole responsibility that the
VeriDri™ Moisture Transmitter
to which this declaration relates, is in conformity with the following standards:
• EN 61326-1: 2006, Class A, Table 2, Industrial Locations
• EN 61326-2-3: 2006
• EN 60529: 2001, IP67
following the provisions of the 2004/108/EC EMC Directive.
The unit listed above and any ancillary equipment supplied with it do not bear CE marking
for the Pressure Equipment Directive, as they are supplied in accordance with Article 3,
Section 3 (sound engineering practices and codes of good workmanship) of the Pressure
Equipment Directive 97/23/EC for DN<25.
Billerica - August 23, 2010
Issued
Mr. Gary Kozinski
Certification & Standards, Lead Engineer
To Next Page
Loading...
