5-8 VersaMax Modules, Power Supplies and Carriers User's Manual GFK-1504N
5
IC200CHS015
Spring-Style Interposing I/O Terminals
The Spring-Style Interposing I/O Terminals (IC200CHS015) provide interface to
a Connector-Style I/O Carrier to field wiring. It has a connector for attaching a
cable from the Connector-Style I/O Carrier and 36 spring-clamp style terminals.
A clear protective hinged door covers the wiring terminals. The board provided
with each I/O module can be folded and inserted in this door.
IC200CHS015
I/O INTERPOSING
SPRING STYLE
One or more Auxiliary I/O Terminal Strips can be added to provide extra field
wiring connections if needed. Auxiliary I/O Terminal Strips insert directly into
the lower edge of the I/O Carrier.
Field Wiring Terminals
Each terminal accommodates one solid or stranded AWG #14 (avg. 2.1 mm
2
cross section) to AWG #22 (avg. 0.36 mm
2
cross section) wire, or two wires up
to AWG #18 (avg. 0.86 mm
2
cross section).
The carrier accommodates current levels up to 2 A per point or 8 A per each
power and ground, and a voltage range of up to 264 V AC. Voltage transients
up to 300 V AC will not damage the carrier.