1-8 VersaMax Modules, Power Supplies and CarriersUser Manual GFK-1504N
1
Power Supplies
An AC or DC Power Supply module installs directly on the CPU or NIU. The
power supply provides +5V and +3.3V power to the modules in the station.
Additional power supplies can be installed on special booster carriers, if
needed, for systems where the number of modules creates the need for a
booster. The AC or DC power supply on the CPU or NIU and the power supply
that resides on the Booster carrier must share the same external power source.
24 VDC, 11 W
POWER SUPPLY
Available Power Supplies and Carrier
The following table lists the available VersaMax power supplies and carrier.
24VDC Expanded 3.3V Power Supply
120/240VAC Expanded 3.3V Power Supply
12VDC Expanded 3.3V Power Supply
Power Supply Booster Carrier
Power supplies are described in chapter 3 of this manual.