5-12 VersaMax Modules, Power Supplies and Carriers User's Manual GFK-1504N
5
IC200CHS101, Main Base
IC200CHS102, Expansion Base
Disconnect-Style Interposing I/O Terminals
Expansion Base – IC200CHS102
The Interposing Disconnect Expansion Base has a connector (J2) for attaching
a ribbon cable to the expansion connector of the Main Base (IC200CHS101)
and 36 box-style terminals for field I/O wiring and power connections. The
Expansion base includes a ribbon cable for connecting the expansion base to
the main base.
The Expansion Base provides connection for terminals on the “B” side of the
VersaMax connector (B1-B18). In addition, it has two groups of common
terminals (Y1-Y8 and Z1-Z8) for connecting two-wire devices without additional
auxiliary terminal blocks.
The base has an individual knife-switch disconnect for each signal and common
terminal and its corresponding pin on the VersaMax cable connector.
To Next Page
Loading...
