GFK-1504N Chapter 6 Expansion Modules 6-13
IC200ERM001
Expansion Receiver Module, Isolated
Modules for Expansion Racks
All I/O and communications modules can be used in expansion racks. Some
analog modules require specific module revisions as listed below. The date
code is a 3-digit number on the outside of the module and on the shipping box.
CPU or NIU Revision 1.5: Date code must begin with a
number other than 9 and must be 011 or greater.
CPU or NIU Revision 2.0 or later: Any date code.
IC200ALG260 A or later
CPU or NIU Revision 1.5: Date code must begin with a
number other than 9 and must be 011 or greater.
CPU or NIU Revision 2.0 or later: Any date code.
To Next Page
Loading...
