54
APPENDIX: REFERENCE
Back Panel
CH 3<>4 Switch Selects the channel to which you will tune
the TV to see the VCR picture if you connect the VCR using one
of the basic hookups.
AUDIO and VIDEO IN Jacks Receives signals from another
component, like a VCR or camcorder, when it is connected to
these jacks. Use INPUT on the VCR’s remote to select L to record
from these jacks.
AUDIO and VIDEO OUT Jacks Sends signals from VCR to
another component, like a TV or VCR, when it is connected to
these jacks.
IN (FROM ANT.) Jack Receives a signal from an antenna or
cable system when attached.
OUT (TO TV) Jack Passes signal to TV using the cable
supplied.
CH
IN
OUT
IN
AUDIO
VIDEO
3 4
(FROM ANT.)
OUT
(TO TV)
RF
To Next Page
Loading...
