GE HEALTHCARERAFT VOLUSON E8 / VOLUSON E6
D
IRECTION KTD102576, REVISION 7 DRAFT (AUGUST 23, 2012) SERVICE MANUAL
3-46 Section 3-7 - Printer Installation
3-7-4-4 UP-D25MD Printer - Settings (cont’d)
b.) Lightness: Sharpness = 7; Dark = 0; Gamma = -6; Light = 2; Gamma Curve = Curve 1
c.) Color Correction: set Printer Hardware Color Correction
d.) Gray Balance: X = 50; Y = 50
e.) Adjustment by Color: Color (region) = Magenta Red
4.) Save the adjusted printer settings with APPLY
and OK. Close window and exit System Setup.
5.) Assign the Printer to the remote keys P1
, P2, P3 and/or P4; see: Section 3-7-5 on page 3-48.
Figure 3-46 Graphics page (Lightness + Color Correction)
Figure 3-47 Graphics page (Gray Balance + Adjustment by Color)
To Next Page
Loading...
