GE Voluson E8 - Replacing Optional Peripherals; How to Mount Peripherals at a Later Date

GE HEALTHCAREDRAFT VOLUSON E8 / VOLUSON E6
D
IRECTION KTD102576, REVISION 7 DRAFT (AUGUST 23, 2012) SERVICE MANUAL
Chapter 8 - Replacement Procedures 8-25
Section 8-17
Replacing optional Peripherals / How to mount Peripherals at a later date
8-17-1 Manpower
One person, 30 - 60 minutes (depending on auxiliary device)
8-17-2 Tools
slotted screwdriver
How to replace optional peripherals, or how to mount them at a later date:
8-17-3 Mounting/Replacing the VGA Image (Video) Resizer. . . . . . . . . . . . . . . . . . . . . . . . . . . 8-26
8-17-4 Mounting/Replacing the 19” LCD Secondary “Patient” Monitor . . . . . . . . . . . . . . . . . . . 8-29
NOTICE
!! NOTICE:
Normally auxiliary devices and peripherals come pre-installed with the Voluson E8 / Voluson E6
system.