Installation
Instructions
Washer
I If gou have ang questions, call 800.GE.CARES(800.432.2737) or visitour Websiteat:ge.com I
In Canada, call 1.800.561.3344 or visitgeapplionces.co
I
BEFOREYOU BEGIN
Read these instructions completelg and carefullg.
• IMPORTANT - Savetheseinstructions
for local inspector's use.
• IMPORTANT - Observeall governing
codes and ordinances.
• Note to Installer - Be sure to leave these
instructions with the ConsumeE
• Note to Consumer - Keepthese instructions
for future reference.
• Skill level - Installation of this appliance requires
basic mechanical and electrical skills.
• Completion time - i-3 hours
• Proper installation is the responsibility of the installer.
• Product failure due to improper installation is not
covered under the Warranty.
FOR YOUR SAFETY:
-_WARNING
• This appliance must be properlu grounded and
installed as described in these Installation Instructions.
• Do not install or store appliance in an area where
it will be exposed to water/weather. See Location
of Your Washer section.
• NOTE: This appliance must be properlg
grounded, and electrical service to the washer
must conform with local codes and ordinances
and the latest edition of the National Electrical
Code, ANSI/NFPA 70.
TOOLS REQUIRED FOR
WASHER INSTALLATION
GI I/4" nut driver
3/8" socket with ratchet
3/8" open-end wrench
GI Adjustable wrench or 7/16" socket with ratchet
GI Adjustable wrench or 9/16" open-end wrench
GI Channel-lock adjustable pliers
GI Carpenter's level
PARTS SUPPLIED
G
CI Water Hoses (2)
E] Cable Tie
CI Hose Guide
STACK BRACKET KIT
A stack bracket kit is available at additional cost.
It can be ordered in the United States bg visiting
our website at ge.com or calling 800.GE.CARES.
Order kit #WE25X10018 or STACKITIWW.
14
To Next Page
Loading...
