About the washer features.
NOTE:Features mag not be available on all washer models.
Cycle Signal
Usethe SIGNALbutton to change
the volume of the end of cycle signal.
Pressthe button until you reach
the desired volume.
0 PREWASH
Prewash ton some models)
Prewashis an extra wash before
the main wash. Useit for heavily soiled
clothes or for clothes with a care label
that recommends prewashing before
washing. Be sure to add high-efficiency
detergent, or the proper wash additive
to the prewash dispenser.
NOTE:When selecting prewash,
it is recommended to use powder
detergent in the main wash (detergent)
compartment.
O
EXTRA Extra Rinse
Usean extra rinsewhen additional rinsing
is desiredto remove excessdirt and
detergent from soiled loads.
Delag Start
Youcan delay the start ofa wash cycle
for 10-18 hours,dependingon the model.
Pressthe DELAYSTARTbutton to choose
the number of hours you want to delay
the start of the cycle,then presstheSTART
button.Themachine will count down and
start automatically at the correct time.
NOTE:If blouforgetto fully closethe door,
a reminder signal will beep remindingyou
to do so.
NOTE:If you openthe door when the dela_l
iscounting down, the machinewill enter
thepausestate. Youmust closethe door
and pressSTARTagain in order to restart
thecountdown.
Lock
Youcan lock the controls to prevent any
selections from being made. Or you can
lock the controls after you have started
a cycle.
Children cannot accidentally start
the washer bbltouching pods with
this option selected.
Tolock the washer, pressand hold
the DELAYSTARTbutton for 3 seconds.
Tounlock the washer controls, press
and hold the DELAVSTARTbutton for
3 seconds.
The control lock icon on the display will
light up when it is on.
NOTE:ThePOWER button can still be
used when the machine is locked.
®
@
8
MV CYCLE (on some models)
Tosavea favoritecycle,setthe desired
settingsforwash cycle,soillevel,spinspeed
and washtemp settingsandholddown the
MVCYCLEbutton for 3 seconds.A beepwill
soundto indicatethe cyclehasbeensaved.
To useyour custom cycle, pressthe
MVCYCLEbutton before washing a load.
Tochange the saved cycle, set the desired
settings and hold down the MV CYCLE
button for 3 seconds.
NOTE:When using MY CYCLE,wash
options cannot be modified after the
cgcle has been started.
NOTE:If btou change wash options with
MYCYCLEbefore starting the chicle,the
MVCYCLElight will turn off and you will
be returned to the base cgcle.
BASKET CLEAN
BasketClean is a cycle that freshens up
the inside of your washer The cycle uses
bleach and more water to refresh your
washer.Use BasketClean once every
month to reduce odor and residuebuildup
insidethe washer
Formore information on BasketClean,
referto the Careand Cleaningsection on
page 11.
To Next Page
Loading...
