O
0
O
ge.com
Sail Level
Changing the SOIL LEVELincreases or decreases the wash time to remove different amounts of soil.
To change the SOIL LEVEL,press the SOIL LEVEL button until you have reached the desired setting.
You can choose between Extra Light, Light, Normal or Heavy soil.
Spin Speed
Changing the SPINSPEEDchanges the final spin speed of the cycles. Always follow the fabric
manufacturer's care label when changing the SPINSPEED.
To change the SPIN SPEED,press the SPIN SPEEDbutton until you have reached the desired setting.
Higher spin speeds are not available on certain cycles, such as Delicates.
Higher spin speeds remove more water from the clothes and will help reduce dry time, but may also
increase the possibility of setting wrinkles on some fabrics.
Wash Temp
Adjust to select the proper water temperature for the wash cycle. The prewash and rinse water is
always cold to help reduce energy usage and reduce setting of stains and wrinkles.
Follow the fabric manufacturer's care label when selecting the wash temperature.
To change the wash temperature, press the WASH TEMPbutton until you have reached the desired
setting. The Sanitized wash temperature is not available on certain cgcles, such as Delicates.
When selecting the Sanitize wash temperature, the washer increases the water temperature
to sanitize and kill more than 99% of many common bacteria found in home laundry. The sanitize
wash temperature is only available on Stain Wash and Whites wash cgcles. For best results, select
the heavy soil setting when using the Sanitize wash temperature setting.
NOTE:Thefirst 10 seconds of the wash fill is always cold. This feature assists in conditioning the fabric
and preventing stains from setting on garments.
START/PAUSE
Pressto start a wash cycle. If the washer is running, pressing it once will pause the washer and unlock
the dooE Press again to restart the wash cycle.
NOTE:tf the washer is paused and the cycle is not restarted within 2 hours, the current wash cycle will
be cancelled.
NOTE:The washer performs automatic system checks after pressing the STARTbutton. Water will flow
in/45 seconds or less. You may hear the door lock and unlock before water flows; this is normal.
To Next Page
Loading...
