– 11 –
Cycle Status
Flood Protection
The Profile model is equipped with a flood protection feature. If the low level pressure switch is opened
while the washer is in idle mode, the electronic control will activate the drain pump to extract any water
in the tub. The rate of water extraction during flood protection exceeds the rate of fill under normal
water conditions. The pump will continue to operate for 60 seconds after the low level switch has
closed.
On some models, cycle status indicator lights show what part of the cycle the washer
is in. On models without indicator lights, the cycle status will show in the display.
Cycle Status Indicators
To Next Page
Loading...
