Need help?Do you have a question about the GE WPRB9250 and is the answer not in the manual?
General| Type | Front Load |
|---|---|
| Capacity | 4.5 cu. ft. |
| Agitator Type | No Agitator |
| Spin Speed | 1300 RPM |
| Energy Star Certified | Yes |
| Color | White |
| Voltage | 120 V |
| Width | 27 inches |
Covers crucial safety precautions and warnings necessary for appliance servicing and operation.
Explains the structure and meaning of the GE washer's model number for identification.
Details how to find and interpret the unique serial number of the washer.
Outlines warranty periods, covered parts, labor, and exclusions for GE washers.
Illustrates control panels for WPRB9250 and WPRB9220 models, highlighting key features.
Explains fundamental controls like START, STOP, and Time Remaining.
Details PRESOAK, QUICK RINSE, and SPEED WASH cycle functions.
Explains SOIL LEVEL, DRAIN & SPIN, and CUSTOM wash settings for enhanced control.
Provides step-by-step guides for quick operation and detailed cycle categories.
Details additional cycle options like SIGNAL, RINSE, DELAY START, and customization.
Describes WASH, GARMENT, and STAIN cycle types, their applications, and recommended uses.
Presents comprehensive charts detailing cycle definitions, wash speeds, and agitation times.
Provides specific data on wash speeds (SPM) and agitation/soak durations for various cycles.
Outlines spin speeds (RPM) and the sequence of spin steps for optimal drying.
A visual guide illustrating the physical placement of essential internal components within the washer.
Covers leveling legs, control panel, front panel, and cover/lid assembly removal procedures.
Details the drain pump, drive belt, motor, and transmission systems and their service procedures.
Explains the water valve, ATC, water level switch, and electronic control board functions.
Covers the inverter, speed sensor, and accelerometer functions and their service.
Step-by-step instructions for entering, exiting, and moving through the service mode menus.
Details various diagnostic tests available within the service mode for system checks.
Procedures for checking, interpreting, and clearing error codes from the washer's fault log.
Provides solutions for common performance, operation, and water-related issues.
A structured chart linking reported problems to their likely causes and recommended corrective actions.
The detailed electrical schematic illustrating all wiring connections and component relationships.
To Next Page
