Beforeyoucall for service...
Troubleshooting tips
Possible Causes What ToDo
Control signals after You forgot to enter a bake
entering cooking time temperature or clemfing time.
or start time
• Press tile BAKE pad and desired temperature or
the SELF CLEAN pad and desired clean time,
Food does not bake Oven controls improperly set. • See tile Using the oven section.
or roast properly Shelf position is incorrect, • See tile Usingthe oven secti()n.
Incorrect cookware or cookware • See the Using the oven section.
of hnproper size being used.
Oven thermostat needs • See the Adjust the oven thermostat--Do it yourself!
adjustment, secti_)u.
Clock not set correctly. • See tile Using the clock and timer section.
Abnninmn foil used improperly • See tile Care and cleaning of the range secfi(m.
in the oven,
Oven bottom not securely • See the Installationof the range section.
seated in position,
Food does not Oven controls improperly set. • Make sure v(>t/press the BROILHI/tO pad.
broilproperly Oven door not closed. • See the Usingtheoven section.
hnproper shelf position • See the Broiling Guide.
being used.
Food being cooked in a hot pan. • Use the broiling, I_aU and _,rid that came with votu"
van _e Make sure it is cool.
Cookwa_e not suited for broiling, • Use the broiling pan and grid that came with your
l_luge,
Alumhlum foil used on the • See the Using the oven section.
the broiling pan and grid has
not been fitted properly and
slit as recommended.
Oven bottom not securely • See tile Installation of the range section.
seated in position,
Oven temperature too Oven thermostat • See the Adjust the oven thermostat--Do it yourself!
hot or too cold needs adjustment, section.
Plug on range is not completely • Make sure electrical lilt/g, is I/lugged,, into a live, properly
do not work inserted in the electrical outlet, grounded outlet.
A fuse in your home may be • Replace the ti/se or reset the circtfit breakel;
blown or the circuit breaker
tripped.
Oven controls improperly set. • See the Using the clock and timer section.
Oven light does not work Light bulb is loose or defective. • Tighten or replace the btdb.
Switch operating light • Call fin" service.
is broken.
Plug on range is not completely
h_serted in the electrical outlet.
48
• Make stu'e electrical pltlg, is I)lugged,, into a live, properly
grotmded outlet,