GEA FK40 Series Assembly Instructions

24
09716-06.2016-DGbFEITrCnRu
D
GB
F
E
I
TR
CN
Ru
10| Installation certificate
INSTALLATION CERTIFICATE
for using the compressors within the European Union
(inaccordancewithMachineryDirective2006/42/EC)
The manufacturer: GEA Bock GmbH, Benzstraße 7
D-72636 Frickenhausen, Tel.: 07022/9454-0
hereby declares that the refrigerating compressor FK40conformstotheessentialrequirements
of Annex II 1B of the Machinery Directive 2006/42/EC.
Applied harmonised standard:
EN 12693:2008 and the corresponding standards referenced
A partly completed machine may only be put into operation when it has been established
that the machine, into which the partly completed machine is to be installed, conforms to the
regulationsoftheMachineryDirective(2006/42/EC).
Themanufacturerundertakestotransmitelectronicallythespecialdocumentationrequired
byindividualstatesforpartlycompletedmachineryuponrequest.
Thespecialtechnicaldocumentationrequiredforpartlycompletedmachineryhasbeencreated
in accordance with Annex VII Part B.
Person responsible for documentation is:
Wolfgang Sandkötter, Benzstraße 7, 72636 Frickenhausen.
Frickenhausen, 01.11.2011 ppa. Wolfgang Sandkötter,
ChiefDevelopmentOfcer

GEA FK40 Series Specifications

General

Brand	GEA
Model	FK40 Series
Category	Air Compressor
Language	English