GEA Grasso 5 - Restart after a Long Standstill Period of Time; Stopping the Compressor

•
Refer to Section 1.4.10.2, Page 31.
1.4.10.4 Restart after a long standstill period of time
After a seasonal standstill (1 to 6 months) or maintenance operations;
Warning!
After a standstill period of time more than 1 month, pre-lubrication just
before starting is always obligatory. Refer Section 4.7, Page 61
•
Check settings of control and safety equipment.
•
Proceed to the complete starting procedure.
Warning!
Restarting compressor after a standstill period of time more than 6
months, consult your supplier. It is recommended to proceed with the
initial start up procedure.
1.4.10.5 Stopping the compressor
The compressor can be stopped at any moment, however, consult the supplier if
further actions are required.
INSTALLATION AND PREPARATION FOR USE
0089288_imm_v_english_19
32 07.04.2021