Geberit FLOWFIT - Geberit FlowFit Safety Guidelines; Intended Use, User Qualifications, and Tool Recommendations

EN
9007212209767563 © 01-2024
972.178.00.0(00)
19
Basic safety notes
Intended use
The Geberit pressing jaws are intended
exclusively for pressing Geberit system pipes and
pressfittings.
Geberit recommends using the Geberit pressing
jaws in the following pressing tools only:
• ViegaPicco
• NussbaumPicco
• RidgidRP210/241
Other pressing tools have not been tested by
Geberit in terms of their suitability for the Geberit
pressing jaws. Using pressing tools with
excessive pressing force can significantly reduce
the service life of the pressing jaws.
Only use the Geberit pressing jaws that
correspond to the diameter of the Geberit
pressfittings to be processed.
Geberit pressing jaws may only be used by skilled
persons qualified in pipe installations.