EN
9007212209767563 © 01-2024
972.178.00.0(00)
27
Operation
Inserting the Geberit FlowFit pressing jaw into the
pressing tool
CAUTION
Risk of injury due to unsecured Geberit pressing
attachments falling
▶ When inserting the Geberit pressing attachments
(pressing jaws, adapter jaws) into the tool holder,
the pressing tool must be upright.
ATTENTION
Damage to the device caused by incorrect use
▶ Only use pressing tools that are recommended for the
intended use with the Geberit pressing attachments (pressing
jaws, pressing collars, adapter jaws) by Geberit.
▶ Insert the Geberit pressing jaw into the pressing tool as
instructed.
→See operating instructions for the relevant pressing tool.
To Next Page
Loading...
