EN
28
27021599620441995 © 12-2023
967.762.00.0(01)
Operation
Inserting the Geberit Mapress pressing jaw into
the pressing tool
CAUTION
Risk of injury due to unsecured Geberit pressing
attachments falling
▶ When inserting the Geberit pressing attachments
(pressing jaws, adapter jaws) into the tool holder,
the pressing tool must be upright.
ATTENTION
Damage to the tool caused by incorrect use
▶ Only use Geberit pressing attachments (pressing jaws,
pressing collars, adapter jaws) that carry the same
compatibility mark as the pressing tool.
▶ Insert the Geberit pressing jaw into the pressing tool as
instructed. → See operating instructions for the relevant
pressing tool.
To Next Page
Loading...
