EN
15
B249-005 © 12-2013
964.874.00.0 (04)
Basic safety notes
WARNING: Risk of injury caused by flying fragments if used
incorrectly or if worn or damaged pressing jaws are used
• Only use the pressing jaws if they are in perfect working order
• Examine the pressing jaws regularly before and after each use
for defects, particularly for incipient cracks in the pressing
contour and the retaining bracket, and also for other damage. If
there are incipient cracks, take the entire pressing jaw out of
service immediately and do not use it again
• Do not use a pressing jaw again after it has been used
incorrectly or in a way that does not comply with its intended
use. Instead, hand it over to an authorised repair shop for testing
• Adhere strictly to maintenance regulations and maintenance
intervals for the pressing jaws and pressing tools
• Wear suitable protective equipment (protective goggles etc.)
• Repair work may only be carried out on the pressing jaws by
Geberit or an authorised repair shop
• Follow the country-specific safety regulations
• Read all safety notes and instructions. Failure to observe the
safety notes and instructions can lead to electric shock, fire and/
or serious injuries. Store all safety notes and instructions for the
future
• Read through and observe the safety notes enclosed with the
pressing tool before commissioning the pressing jaws
To Next Page
Loading...
