14
1
Water care
The Water Care page will help you set up your ideal
filtration and heating settings� Choose between Away from
Home, Beginner, Energy Savings, Super Energy and
Weekender, depending on your need� Touch the Water
care name to choose your setting� A green checkmark will
appear on the selected icon to confirm your choice �
In Economy mode, the set point will be reduced by 20°F*,
which means that the heating system will not be engaged
unless the temperature falls to 20°F below the spa's set
temperature�
The filtration schedule shown on the screen will apply to
the main filtration pump, most likely pump 1� If your spa
uses a circulation pump configured to run 24 hours, the
screen will show you the purge setting instead of filtration�
The purges are pre-programmed for a fixed number of
minutes, therefore the duration will be set to N/A on the
screen, and only the start time can be modified�
* Default pack value
Water care modes
Away:
In this mode the spa will always be in economy;
the set point will be reduced by 20° F�
Beginner:
The spa will never be in economy mode and will be
filtering according to the pack's low level configuration�
Energy Savings:
The spa will be in economy mode during the peak hours
of the day and resume normal mode on the weekend�
Super Energy Savings:
The spa will always be in economy mode during peak
hours, every day of the week�
Weekender:
The spa will be in economy mode from Monday
to Friday, and will run normally on the weekend�
Keypad functions
To Next Page
Loading...
Need help?
General
