21
1
Keypad functions
Speakers Settings
Move the sliders to adjust the Balance, Fader and
subwoofer settings�
The Fader and Subwoofer sliders will only appear in the
Speaker menu if the corresponding speakers are installed
on the in�stream 2�
Source Menu
To change the audio source, simply tap on the desired one�
Note that only the sources installed on the in�stream 2 will
be displayed in the source menu�
Disconnect Bluetooth
If a device with Bluetooth technology is connected to
the in�stream 2, you can disconnect it by pressing the
Disconnect button at the bottom of the screen�
Doing so will also prevent the in�stream 2 from
automatically reconnecting to this specific device until it
has been reconnected using the device itself�
in.clear functions
This menu is available only if the in�clear is detected in the
spa accessories�
The k1000 keypad can be used with the in�clear
sanitation system�
The in.clear menu allows you to configure your
maintenance settings and boost levels� The main in.clear
menu shows the current status of the sanitation system,
whether it's on, and if it's generating bromine or not�
For more information about the in�clear, bromine levels,
and other settings, please refer to the in�clear user manual�
To Next Page
Loading...
Need help?
General
