20
1
Keypad functions
Wipe screen
This message appears when too much water is detected
on the touch screen� Simply wipe away excess water�
in.stream 2 functions
This menu is available only if the in�stream 2 audio station
is detected in the spa accessories�
The audio page will allow you to control the active audio
source� Note that only the functions that apply to the
selected source will be available� From this page, you can
also access the following:
• in.stream 2 on/off
• speaker settings
• audio source selection
• disconnect bluetooth
To select an item, slide the right wheel until the desired
icon is highlighted in the middle�
For more information about the in�stream 2 audio station,
please refer to the in�stream 2 techbook�
Power
To turn the in�stream 2 on or off, tap the icon located in
the center of the screen�
To Next Page
Loading...
Need help?
General
