18
1
Keypad functions
Electrical configuration
Please do not make changes in this section unless you
are a qualified electrician.
In this section you can change the low-level configuration,
as well as modify the number of phases and the input
current�
Please note that if there are two spa packs in the system
(i�e� a SwimSpa installation), the master unit’s chosen
configuration must support a slave unit� If, after re-booting,
the chosen configuration does not support SwimSpa
installations, the in�k1000 will return (after about
45 seconds) to this configuration menu and prompt the
user to select a configuration number again�
Contrast page
Simply touch the item you want to change�
Language Select
Use this page to select the display language of the
in�k1000 keypad�
To Next Page
Loading...
Need help?
General
