Need help?Do you have a question about the GEDA AB 450 and is the answer not in the manual?
General| Brand | GEDA |
|---|---|
| Model | AB 450 |
| Category | Lifting Systems |
| Language | English |
Defines the proper applications and permitted construction alternatives for the suspended working platform.
Highlights disallowed uses of the platform and the severe consequences of misuse.
Provides critical safety directives for operators, including daily checks and personal protective equipment (PPE).
Covers essential safety rules for operating the machine, including shutdown procedures and wind speed limits.
Specifies safety protocols for maintenance activities, emphasizing disconnection and proper equipment.
Details safety procedures for electrical work, stressing the need for qualified electricians and disconnection.
Details the maximum load capacities for different platform lengths and configurations, considering platform and personnel weight.
Specifies load capacities for the AB 450 model with a single winch and C-clamp suspension.
Lists load capacities for the AB 450 model with two winches and C-clamp suspension across various lengths.
Provides load capacity data for the AB 650 model with one winch and C-clamp suspension.
Details load capacities for the AB 650 model with two winches and C-clamp suspension for different platform lengths.
Outlines the essential steps and checks required to ensure the stability of the outrigger and overall setup.
Explains the initial steps for assembling the outrigger, including transporting components to the roof.
Provides detailed instructions and diagrams for assembling the DA 1 and DA 6 outriggers.
Covers the assembly of the working platform segments on the ground.
Details the procedure for securely attaching the rope winches to the C-clamp bracket.
Covers the steps for attaching the rope winches to the mounting sheet of the winch bracket.
Provides instructions for connecting the control box, power cord, and winches, including cable length limitations.
Details the crucial steps for installing the drive and safety ropes onto the C-clamp and winches.
Explains how to insert and secure the drive rope into the rope winch and the importance of lubrication.
Outlines essential checks, including test runs with and without load, before commencing operation.
Reinforces safety instructions for operation, including warnings about raised loads and unauthorized access.
Guides the initial setup and activation of the suspended working platform, including control box connection.
Details the mandatory daily visual inspections and checks required before operating the platform.
Explains how the platform is controlled and its operational characteristics, including tilt compensation.
Describes the functions and operation of the single control box, including ascent, descent, and stopping.
Describes the functions and operation of the central control box, including tilt compensation.
Details how to immediately stop the platform in hazardous situations using the EMERGENCY STOP button.
Covers the mandatory types of inspections (before commissioning, recurring, intermediate) and their procedures.
Lists the factory-performed tests and checks required before the machine's first use.
Details daily visual inspection points and procedures to ensure safe operation.
Emphasizes the need for recurring checks, recommending annual inspections or more frequent checks based on usage.
To Next Page
