General safety information GEDA
®
SUSPENDED WORKING PLATFORM AB 450 / 650
Assembly and Operating Manual
16 / 96 BL061 GB Edition 04/2016
2.3 Safety instructions for transport
Immediately report transport damage and/or missing parts to the
supplier.
During transport work, wear a safety helmet, safety shoes and safety
gloves!
Never step under suspended loads!
Only use appropriate, standardised and tested lifting gear (forklifts,
cranes) and sling gear (round slings, lifting straps, rope slings, chains)
for transport at the assembly site.
When selecting lifting equipment, always take into account the
maximum suspended loads!
Please refer to the dimensions and weights in the Chapter “Technical
Data” (3).
Only carefully load and transport equipment that has been
disassembled, packaged and lashed.
Always ensure that the machine is transported without being knocked
or jolted.
Observe the pictograms on the packaging.
Only sling to the designated slinging points.
Always secure transported loads against falling or tipping over!
To Next Page
Loading...
