ADV20 QS, V1.02 13
Italiano English
Parameter Explanation Settings
Factory
Setting
NOTE
a02.10
Combination of the
First and Second
Master Frequency
Command
0: First Master Frequency Command
1: First Master Frequency Command+
Second Master Frequency Command
2: First Master Frequency Command -
Second Master Frequency Command
0
a02.11
Keypad Frequency
Command
0.00 to 600.0Hz
60.00
a02.12
Communication
Frequency
Command
0.00 to 600.0Hz
60.00
02.13
The Selections for
Saving Keypad or
Communication
Frequency
Command
0: Save Keypad & Communication
Frequency
1: Save Keypad Frequency only
2: Save Communication Frequency only
0
02.14
Initial Frequency
Selection (for
keypad & RS485)
0: by Current Freq Command
1: by Zero Freq Command
2: by Frequency Display at Stop
0
02.15
Initial Frequency
Setpoint (for keypad
& RS485)
0.00 ~ 600.0Hz 60.00
02.16
Display the Master
Freq Command
Source
Read Only
Bit0=1: by First Freq Source (Pr.02.00)
Bit1=1: by Second Freq Source (Pr.02.09)
Bit2=1: by Multi-input function
##
02.17
Display the
Operation
Command Source
Read Only
Bit0=1: by Digital Keypad
Bit1=1: by RS485 communication
Bit2=1: by External Terminal 2/3 wire mode
Bit3=1: by Multi-input function
##
02.18
User-defined Value
2 Setting
0 to Pr.00.13 0
02.19
User-defined Value
2
0 to 9999 ##
To Next Page
Loading...
