Need help?Do you have a question about the gefran SIEIDrive ADV50-2022 Series and is the answer not in the manual?
General| Series | ADV50-2022 |
|---|---|
| Frequency | 50/60 Hz |
| Protection Features | Overcurrent, Overvoltage, Undervoltage, Overtemperature, Short Circuit |
| Storage Temperature | -20°C to 60°C |
| Control Method | Sensorless Vector Control |
| Communication Interface | CANopen |
| Operating Temperature | -10°C to 50°C |
| Humidity | 5% to 95% non-condensing |
| Dimensions | Varies by model |
| Weight | Varies by model |
Key safety warnings including DANGER, WARNING, and CAUTION notices.
Details on drive control system, frequency setting, and torque.
Covers functions like acceleration, deceleration, and input/output signals.
Specifies installation requirements and operating temperature limits.
Explanation of various terminal symbols used in wiring.
Step-by-step guide for operating the drive using the digital keypad.
Details on terminal functions for power and control connections.
Detailed explanations and factory settings for control terminals.
Covers Group 0 (User) and Group 1 (Basic) parameter settings.
Parameters for operation modes, start/stop, and frequency commands.
Configuration for digital/analog inputs, outputs, and multi-function terminals.
Parameters for motor setup, protection functions, and communication protocols.
Settings for PID control, PG functions, and extension card parameters.
List of fault codes with their descriptions and potential causes.
Step-by-step guidance to resolve identified fault conditions.
To Next Page