_____ _
User Guide Electrical Line Shaft for ADV200 Page 55 of 72
=
=
=
=
=
=
0,4
0,2
= 2
Therefore, we have:
Els Ratio 0 = 2;
------------------------------------------------------------------------------------------------------------------------------------------------
On the other hand, if we want to consider a unit ratio Els Ratio 0 = 1 when the Master and Slave rim speeds
are the same (and space traveled is the same), we have to include roller length in the calculation of
Considering that:
=
Where:
=
1
We have to set Els Mech Ratio = 0.5
To Next Page
Loading...
Need help?
General