64
OPERATION
Machine Operation
Inspection After Warm-up
After warming up the engine and hydraulic
oil, perform the checks and inspections
described below, and repair if there is a
problem.
1. Check that the warning lamps and meters
are as follows:
¡Are all the warning lamps off?
¡Is the water temperature gauge’s
needle within the green range?
2. Check that there are no irregularities in
the exhaust color, sound and vibrations.
3. Set the safety bar to the locked position
and check that the control levers, auxiliary
pedal are locked.
T7B015
T7D0121
To Next Page
Loading...
