Need help?Do you have a question about the Gehl CTL80 and is the answer not in the manual?
General| Operating Weight | 10431 lbs |
|---|---|
| Rated Operating Capacity | 2800 lbs |
| Width | 78 in |
| Height | 81.3 in |
| Tipping Load | 8000 lbs |
| Engine Make | Yanmar |
| Rated Operating Capacity (SAE) | 2, 800 lbs |
| Net Power | 74 hp (55 kW) |
| Auxiliary Hydraulic Flow | 22.5 gal/min |
| Fuel Capacity | 26.4 gal |
| Hydraulic System Flow | 22.5 gal/min |
Explains safety symbols, signal words, and general warnings.
Essential safety rules for operating the machine.
Steps to take before starting machine operation.
Procedures for safely starting the machine's engine.
Guidelines for safe machine operation.
Procedures for safely stopping and parking the machine.
Safety guidelines for performing machine maintenance.
Pre-operation checks and preparations.
Procedures for starting and stopping the machine's engine.
Detailed explanation of how to operate the machine's functions.
Specific guidelines and warnings for various operational tasks.
Safe procedures for loading and unloading the machine.
General guidelines and cautions for machine maintenance.
Daily pre-operation inspection checklist.
Troubleshooting steps for engine overheating issues.
Procedures for dealing with a dead battery and jump-starting.
Interpreting and responding to dashboard warning lamps.
Key technical data for each model (CTL60, CTL70, CTL80).
To Next Page
