138
TROUBLESHOOTING
If a Fuse Blows
If a light does not turn on or the electric
system does not operate, a fuse may be
blown. Inspect the fuses.
Inspecting and Replacing the Fuse
WARNING
If the fuse blows as soon as it is replaced,
there is a problem with the electric
system. Continued use may lead to fire.
Consult a Gehl sales or service outlet.
1. Turn the starter key to the OFF position
and stop the engine.
2. Open the fuse box cover (1).
3. Inspect for any blown fuses.
4. If a fuse is blown, replace it with a spare
fuse of the same capacity.
T7J002
1
E4J007
NormalBlown
Fuse Layout and Circuits Protected
Protected circuit
Capacity
Protected circuit
Capacity
30A External power
socket (option)
Heater (option)
20A Tail light
20A Front light
30A
Arm float, Lever lock
Auxiliary
10A
Rear wiper (option)
10A
Front wiper (option)
20A Reserve
20A Instrument panel
Feed pump
10A Safety relay
Generator
30A Engine
stop-solenoid
20A Horn
Interior light (option)