EasyManua.ls Logo

Gehl V270 - User Manual

Gehl V270
102 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Skid-Steer Loader
Operator’s Manual
Form No.
917387
BP0310
English
V270
V270 (EU)

Table of Contents

Questions and Answers

  • K
    Kristin RandolphJul 27, 2025
    Why is the entire electrical system not working on my Gehl V270 Compact Loader?
    • L
      lharrisJul 27, 2025
      If the entire electrical system of your Gehl Compact Loader isn't functioning, here's what you can check: * Ensure the battery disconnect switch is in the ON position. * Inspect the main wiring harness connectors at the rear of the ROPS/FOPS to make sure they are properly plugged in. * Check the battery terminals and cables, clean them if they are corroded, and retighten. * Test the battery and replace if needed. Also, the keyswitch or the 10 amp fuse (key switch) might be faulty, consider replacing the keyswitch.
  • J
    Jonathan FordAug 1, 2025
    What to do if instrument panel lamps don’t work on Gehl V270 Compact Loader?
    • S
      Sarah JohnsonAug 1, 2025
      If the instrument panel lamps don't light up when the keyswitch is turned to “ON” on your Gehl Compact Loader, the fuse may have blown, so replace it. Also, check the main wiring harness connectors at the rear of the ROPS/FOPS to ensure they are properly plugged in. Make sure that the battery terminals and cables are not loose or corroded; clean and retighten them if needed.
  • J
    judy41Aug 8, 2025
    How to troubleshoot a non-working fuel gauge on a Gehl Compact Loader?
    • J
      John MartinAug 8, 2025
      If the fuel gauge on your Gehl Compact Loader isn't working, it could be due to a faulty fuel gauge sender or the fuel gauge itself, so consider replacing them. Also, a blown fuse could be the cause, so replace the fuse. Verify all wiring connections to ensure they are secure.
  • S
    Sarah RamirezAug 14, 2025
    What causes the engine temperature gauge to fail in a Gehl V270 Compact Loader?
    • J
      Jacob HornAug 14, 2025
      If the engine temperature gauge on your Gehl Compact Loader isn't working, the temperature sender or the gauge itself might be faulty, so replace them. Check if the fuse has blown and replace it if necessary. Also, verify all wiring connections to ensure they are secure.
  • T
    Tammy GallowayAug 19, 2025
    Why does the hourmeter not function on my Gehl V270?
    • D
      dwadeAug 19, 2025
      If the hourmeter on your Gehl Compact Loader isn't working, verify the wiring connections, as loose connections can be the cause. The alternator may be faulty, so repair it. Also, check the fuse and replace it if blown. The hourmeter itself could be faulty, so consider replacing it.

Summary

CHAPTER 1 INTRODUCTION

Loader Identification

Details about identifying specific parts of the skid-steer loader.

Control and Indicator Symbols

Visual representations of various controls and indicators on the machine.

CHAPTER 2 SAFETY

Safety Alert Symbol and Hazard Definitions

Explains the safety alert symbol and definitions of DANGER, WARNING, CAUTION.

Mandatory Safety Shutdown and Reminders

Procedures for safe shutdown and general operating reminders.

Potential Hazards and Decals

Identifies risks and discusses the importance and types of safety decals.

ANSI-Style Safety Decals

Details on ANSI standard safety decals and their locations on the machine.

ISO-Style Safety Decals

Information on international ISO-style safety decals and their placement.

CHAPTER 3 CONTROLS AND SAFETY EQUIPMENT

Operator Compartment Safety

Information on guards, shields, restraint bar, and the operator's seat.

Safety Interlock and Parking Systems

Explains the safety interlock, Hydraloc, and parking brake systems.

Instrument Panels and Controls

Details on instrument panels, joystick, hand/foot controls, and auxiliary hydraulics.

Joystick and Hand;Foot Controls

Instructions for operating the loader using joystick or hand/foot control systems.

Auxiliary Hydraulic System

Details on standard and high-flow auxiliary hydraulic systems and their operation.

CHAPTER 5 SERVICE

Service Procedures and Parts

General service guidelines, replacement parts, and dealer services.

Lubrication

Guidelines for lubricating various systems of the loader.

Chaincase and Drive Chain Maintenance

Procedures for checking and adjusting chaincases and drive chains.

Engine Air Cleaner Service

Instructions for cleaning and replacing the engine air cleaner elements.

Engine Service Procedures

Details on servicing engine components like oil filters and fuel filters.

Hydraulic System Maintenance

Procedures for checking and changing hydraulic oil and filters.

Cooling System and Tire Maintenance

How to clean the cooling system and check tire pressure.

Electrical System Maintenance

Information on the fuse panel, battery, and electrical system servicing.

CHAPTER 6 TROUBLESHOOTING

System Troubleshooting Guides

Diagnosing and resolving issues in electrical, engine, and hydraulic systems.

CHAPTER 7 MAINTENANCE

Maintenance Interval Chart

A schedule outlining recommended maintenance tasks and intervals.

Maintenance Log

A log for recording performed maintenance procedures and dates.

CHAPTER 8 SPECIFICATIONS

Loader Specifications and Features

Technical data, standard/optional features, capacities, and ratings.

Material Densities and Bucket Selection

Data on material densities for selecting appropriate buckets.

CHAPTER 9 TORQUE SPECIFICATIONS

Torque Specifications

Values for tightening various hardware components to ensure proper assembly.

GEHL COMPANY WARRANTY

Warranty Terms and Exclusions

Details on the warranty coverage, service inclusions, and exclusions.

Gehl V270 Specifications

General IconGeneral
Rated Operating Capacity2, 700 lbs
Tipping Load5, 400 lbs
Engine MakeYanmar
Hydraulic Pump TypeGear
Engine Model4TNV98

Related product manuals