Need help?Do you have a question about the Gehl R135 and is the answer not in the manual?
General| Operating Capacity | 1350 lbs |
|---|---|
| Tipping Load | 2700 lbs |
| Rated Operating Capacity (SAE) | 1350 lbs |
| Engine Make | Yanmar |
| Rated Operating Capacity (kg) | 612 kg |
| Tipping Load (kg) | 1225 kg |
| Fuel Tank Capacity | 16 gal |
| Net Power | 46 hp |
| Fuel Capacity | 16 gal |
Details the mandatory steps for safely shutting down the machine before maintenance or leaving it unattended.
Provides instructions on fastening, unfastening, and maintaining the seat belt for operator safety.
Describes the safety interlock system and the required daily tests for proper operation.
Details how to engage and disengage the lift arm support to prevent unexpected lowering.
Describes T-bar, joystick, and hand/foot control systems for machine movement and attachment operation.
Outlines critical checks and preparations required before starting the engine and operating the machine.
Provides a guide for safely starting, warming up, and stopping the machine's engine.
Emphasizes reading safety chapters and following instructions for all maintenance tasks to prevent injury.
Lists inspection, check, lubrication, and filter change intervals based on operating hours.
Provides common engine problems, their possible causes, and corrective actions.
Addresses common hydraulic and hydrostatic drive system problems, their causes, and solutions.
To Next Page
