Need help?Do you have a question about the Gehl RT250 and is the answer not in the manual?
General| Rated Operating Capacity | 2, 500 lbs |
|---|---|
| Engine Power | 74 hp |
| Tipping Load | 5, 000 lbs |
| Auxiliary Hydraulics - High Flow | 35 gpm |
| Engine Net Power | 74 hp |
| Engine Gross Power | 74 hp |
| Overall Length with Bucket | 146.2 inches |
| Width | 72 inches |
| Horsepower | 74 hp |
| Length with Bucket | 146.2 inches |
Identifies machine serial number for parts ordering and service.
Lists abbreviations used throughout the manual for clarity.
Lists other manuals relevant to machine operation and maintenance.
Details operator cabin components, including doors, windows, and interior trim.
Covers structural base frame components: front, center, and rear sections.
Outlines electrical system parts: harnesses, fuses, relays, and power distribution.
Lists and illustrates external engine parts like alternator, starter, and pulleys.
Details fuel system components: tank, filters, lines, and pump.
Describes air intake system: cleaner, filters, hoses, and related parts.
Illustrates the components of the optional air conditioning compressor system.
Shows the radiator and hydraulic cooler assembly for late-model machines.
Illustrates the radiator and hydraulic cooler for early-model machines.
Details track system components: rubber track, tensioning mechanisms, idlers.
Shows the drive motor and sprocket assembly for the track system.
Illustrates internal components of the track drive motor assembly.
Lists parts bolted onto the loader arm structure.
Details the standard manual attachment bracket and its parts.
Illustrates the optional Power-All-Tach attachment bracket and components.
Shows hydraulic hoses and fittings for the loader arm tilt function.
Details hydraulic hoses and components for the loader arm lift function.
Outlines the hydraulic circuit for standard auxiliary functions.
Describes the hydraulic circuit for the optional high-flow system.
Illustrates the hydraulic tank assembly for late-style machines.
Illustrates the hydraulic tank assembly for early-style machines.
Shows the hydraulic filter and its related components.
Details the hydraulic circuit for the hydrostatic drive pump.
Outlines the hydraulic circuit for the right-side track drive system.
Details the hydraulic circuit for the left-side track drive system.
Describes the hydraulic circuit for the pilot pressure manifold.
Shows the hydraulic pump circuit for standard hydraulic systems.
Illustrates the hydraulic circuit for the self-leveling function.
Provides a breakdown of the hydrostatic drive pump components.
Illustrates the components of the standard hydraulic pump.
Shows the components of the high-flow hydraulic pump.
Details the main hydraulic valve components for standard systems.
Illustrates the components of the standard self-leveling valve.
Shows the components of the switchable self-leveling valve.
Details the components of the track tension cylinder.
Shows the components of the loader arm tilt cylinder.
Illustrates the components of the loader arm lift cylinder.
Guidance on applying/replacing decals and paint finishes.
Shows the location of decals on the front of the machine.
Illustrates decal locations on the right side of late-style machines.
Shows decal locations on the left side of late-style machines.
Illustrates decal locations on the right side of early-style machines.
Shows decal locations on the left side of early-style machines.
Details the location of decals on the rear of the machine.
Shows the location of decals within the engine compartment.
Provides tables for O-ring sizes and part numbers for various fittings.
Lists torque specifications for hydraulic, fuel, and coolant adapters.
Provides torque values for metric bolts based on size and grade.
Lists torque values for SAE and metric bolts, including dry and oiled conditions.
To Next Page
