Gehl SL4635 User Manual

OPERATOR’S MANUAL
Form No.
907808
English
SL4635
&
SL4835
Skid Loaders
®

Gehl SL4635 Specifications

General

Brand	Gehl
Model	SL4635
Category	Compact Loader
Language	English

Summary

International Symbols

Chapter 1 Introduction

Chapter 2 Model Specifications

Chapter 3 Checklists

Pre-Delivery Checks

Checklist for pre-delivery inspections before customer delivery.

Delivery Procedures

Checklist for passing information to the customer at delivery.

Chapter 4 Safety

Mandatory Safety Shutdown Procedure

Procedure for safely shutting down the loader before servicing.

Additional Safety Reminders

Important safety guidelines and precautions for operating the loader.

Chapter 5 Controls & Safety Equipment

Guards and Shields

Importance of guards, shields, and safety decals for operator protection.

Control System Descriptions

Operation of T-Bar, Hand & Foot, and Dual Hand control systems.

Operator Interface Features

Parking brake, restraint bar, seat position, instrument panel, interlock.

Attachment Mounting and Hydraulics

Attachment systems and auxiliary hydraulic connections.

Chapter 6 Operation

General Operating Information

General information before operating the loader.

Starting and Stopping Procedures

Recommended procedures for starting and stopping the loader.

Attachment Handling

Procedures for changing attachments.

Loader Operations

Procedures for digging, loading, dumping, and scraping.

Transport and Storage

Procedures for highway travel, long-term storage, and transport.

Chapter 7 Adjustments

Loader Raising and Lowering Procedures

Procedures for safely raising and lowering the loader.

Throttle and Drive Adjustments

Adjustments for throttle lever, accelerator pedal, and drive chains.

Electric Auxiliary Controls Adjustment

Adjusting electric auxiliary control potentiometers.

Chapter 8 Lubrication

Lubricant Recommendations

Recommended lubricants for hydraulic system, chaincases, grease fittings, and engine oil.

Lubrication Locations and Intervals

Locations and frequencies for greasing machine components.

Lubrication Chart

Visual chart showing lubrication points and intervals.

Chapter 9 Troubleshooting

Electrical System Issues

Troubleshooting common electrical system problems and their remedies.

Engine Problems

Troubleshooting common engine issues like cranking speed and overheating.

Hydrostatic System Faults

Troubleshooting hydrostatic system issues like drive response and noise.

Hydraulic System Malfunctions

Troubleshooting hydraulic system issues like lift/tilt controls and bucket leveling.

Chapter 10 Service

General Service Information

Overview of service procedures, safety, and replacement parts.

Operator Services

Routine checks like engine oil, hydraulic oil, and air cleaner.

100-Hour Service Intervals

Maintenance tasks required every 100 hours.

500-Hour Service Intervals

Maintenance tasks required every 500 hours or annually.

Jump-Starting Procedure

Safe procedure for jump-starting the loader battery.

Fluid and Filter Changes

Procedures for changing engine oil, fuel filter, hydraulic oil, and chaincase oil.

SL4635 Hydrostatic/Hydraulic Schematic

SL46/4835SX Hydrostatic/Hydraulic Schematic

SL46/4835DX Hydrostatic/Hydraulic Schematic

SL46/4835 Electrical Schematic

Chapter 11 Maintenance Schedule

Maintenance Interval Chart

Chart detailing service intervals for various procedures.

Maintenance Log

Log for recording performed maintenance procedures and dates.

Torque Specifications

Gehl Company Warranty

California Proposition 65 Warning