Gehl SL4840 User Manual (English)

Questions and Answers:

L
leelindaAug 10, 2025
Why is the entire electrical system not working on my Gehl Compact Loader?
- J
  James AlvarezAug 10, 2025
  If the entire electrical system of your Gehl Compact Loader isn't working, there are several things to check: * Ensure the battery disconnect switch is in the ON position. * Inspect the circuit breakers on the engine panel for any that may have tripped; if tripped, identify and resolve the issue causing the trip, as the breaker resets automatically. * Confirm that the main wiring harness connectors at the rear of the ROPS are securely plugged in. * Check the battery terminals and cables for looseness or corrosion; clean and retighten if necessary. * Test the battery to determine if it is faulty and needs replacement.
M
Madeline FernandezAug 16, 2025
What to do if instrument panel lamps don't work on my Gehl Compact Loader?
- K
  Kelly EvansAug 16, 2025
  If the instrument panel lamps on your Gehl Compact Loader don't light up when the keyswitch is turned to the 'ON' position, here's what you should do: 1. Check circuit breaker #1 to see if it has tripped. If so, inspect the circuit and install a new fuse. 2. Inspect the battery terminals and cables for any signs of looseness or corrosion. Clean the terminals and cables, then retighten them securely.
C
Cheryl SantosAug 21, 2025
How to troubleshoot a fuel gauge that is not working on a Gehl Compact Loader?
- D
  Dan WalkerAug 21, 2025
  If the fuel gauge on your Gehl Compact Loader isn't working, consider these potential causes and solutions: * The fuel gauge sender might be faulty, in which case it should be replaced. * The fuel gauge itself could be defective and require replacement. * There may be loose wiring or terminal connections. Verify all wiring connections to ensure they are secure.
G
gcervantesAug 28, 2025
Why is the engine temperature gauge not working on my Gehl Compact Loader?
- E
  Emily KellyAug 28, 2025
  If the engine temperature gauge on your Gehl Compact Loader is not functioning, here are a few things to investigate: * The temperature sender might be faulty and need replacing. * The temperature gauge itself could be defective, requiring replacement. * Check for loose wiring or terminal connections and verify that all connections are secure.
W
William PatelSep 2, 2025
What to do if the hourmeter is not working on my Gehl Compact Loader?
- M
  martinamandaSep 3, 2025
  If the hourmeter on your Gehl Compact Loader isn't working, here are a few things you can check: * First, verify the wiring connections to ensure they are secure, as loose connections can cause the hourmeter to fail. * Second, a faulty alternator can cause the hourmeter to fail. Consider repairing the alternator. * Finally, the hourmeter itself may be faulty and need to be replaced.