90 50940193/DP0415
6. Tow the machine for short distances only, such as towing it onto a trailer. Depending
on the internal leakage rate of the travel motors, the machine may roll easily with the
brake release activated, or the tires may skid until the oil is forced from the motors.
7. Reset the parking brake by pulling up on plunger (X) or starting the machine.
Jump-starting
If the battery is discharged or does not have enough power to start the engine, jump-start
the engine as follows:
Two people are required for safe jump-starting. An
additional person is required to remove the jumper
cables with the operator remaining in the operator's seat once the
engine is running. Start the engine from the operator’s seat with all
controls in “neutral.”
NEVER make jumper cable connections directly to the starter solenoid
of either engine.
To reduce the risk of a short circuit, keep metal parts on your clothing
and metal jewelry away from the battery.
Do not jump-start a frozen battery, or it may explode. A discharged
battery can freeze at 14°F (10°C).
Wear safety glasses and avoid leaning over the batteries while jump-
starting.
To avoid personal injury, closely follow the procedure, step-by-step.
Important: The external power source must deliver 12 volts, DC. Supply voltages higher
than 12V can damage the electrical systems of both machines. Only use jumper cables that
are in good condition.
Important: The booster battery must have a voltage of 12-volts.
To Next Page
Loading...
Need help?
General
