100 50940193/DP0415
Disconnecting Auxiliary Hydraulic Couplings
1. Empty the attachment and lower it to the ground.
2. Shut off the engine, but do not turn off the
ignition. Move the auxiliary hydraulics
control rocker switch (F, Figure 67) on the
right T-bar, joystick or hand control back
and forth to relieve pressure in the
auxiliary hydraulics circuit.
3. Turn off the ignition. Remove the ignition
key and take it with you.
4. Raise the safety bars/arm rests and exit the
machine using the hand holds.
5. Push on the hose connection locking rings
until the hose connections release.
Figure 67 – Auxiliary Hydraulics
Control Rocker Switch
F
To Next Page
Loading...
