98 50940193/DP0415
Disconnecting Attachments
Position the attachment so that after
disconnecting, the attachment will stand safely and
not tip over. Serious injury can occur if an attachment tips over onto a
person.
1. Empty the attachment and drive to an open, level area to disconnect the attachment.
2. Lower the attachment to the ground.
3. Place the attachment lock into the
unlocked position (Figure 64):
• All-Tach® system manual hitch:
Move hitch lock lever (G) all the way
to the right.
• Power-A-Tach® system quick attach
hitch: Press the Power-A-Tach® sys-
tem unlock button (I) on the control
keypad until safety flags (H) have
moved all the way in.
4. Lower the lift arm until tabs (J) on top of
the attachment plate disengage out of
hooks (K) on the back of the attachment.
5. Look behind you for bystanders and
obstacles. Drive straight back in reverse
away from the attachment.
Manual Attachment Hitch In
Unlocked Condition
Power-A-Tach® System Quick
Attach Hitch In Unlocked Condi-
tion
Figure 64 – Attachment Hitch
Unlocked
G
I
H
J
J
J
J
To Next Page
Loading...
