Gehl RS6-34 - Page 243

RS5-34 Telescopic Handler BOOM ASSEMBLY
PRINTED IN U.S.A. 701-5 913241
Alt
=
to
hide
template
information
Alt+ to display template information
Template
Name:
OML
_
2
_
col
907871E
Template Date: 1997_02_12
STEP 9
G1005030
Loosen and remove the retainer bolt (1) and nut (2)
from the boom pivot shaft.
STEP 10
G1005031
Remove the boom pivot shaft from the boom
assembly.
STEP 11
Lift the rear of the boom assembly high enough to
clear the bearings and upright standard. If necessary,
lift and adjust the front of the boom so that the boom
is level.
NOTE:
The machine may be started and carefully
backed away from under the boom, or the rolling
gentry hoists may be used to roll the boom assembly
away from the unit.
2
1
View thousands of Crane Specifications on FreeCraneSpecs.com
View thousands of Crane Specifications on FreeCraneSpecs.com