Need help?Do you have a question about the Gehl RS5-34 and is the answer not in the manual?
General| Operating Weight | 17, 350 lbs |
|---|---|
| Max Lift Height | 34 ft |
| Engine Power | 74 hp |
| Lift Capacity | 5, 500 lbs |
| Rated Capacity | 5, 500 lbs |
| Rated Operating Capacity | 5, 500 lbs |
| Lift Height | 34 ft |
General safety alerts and information about the importance of vigilance.
Key rules and reminders for safe operation and maintenance.
Specifications for maximum lift capacity, height, reach, and frame leveling.
Graphical representations of load capacities at various boom extensions and angles.
Procedure to safely release hydraulic pressure before engine work.
Step-by-step instructions for removing the engine from the machine.
Step-by-step instructions for installing the engine into the machine.
Procedures for diagnosing and resolving electrical issues.
Flowchart for diagnosing starter circuit issues when the engine does not start.
Troubleshooting steps for park brake circuit issues.
Diagnosing issues with the steering mode selection circuit.
Tests for battery, fuses, relays, switches, solenoids, and related components.
Step-by-step instructions for safely removing the battery.
Step-by-step instructions for installing the battery.
Detailed steps for removing the steering control valve assembly.
Procedure to relieve hydraulic pressure for rear axle service.
Procedure to relieve hydraulic pressure for front axle service.
Diagnostic procedures for common hydraulic system issues.
Procedure to safely relieve hydraulic pressure for the frame leveling cylinder.
Procedure to safely relieve hydraulic pressure for the tilt cylinder.
General procedures and safety warnings for hydraulic cylinder repair.
Procedure to safely relieve hydraulic pressure for the slave cylinder.
Procedure to safely relieve hydraulic pressure for the lift cylinder.
Procedure to safely relieve hydraulic pressure for the extend cylinder.
Overview of boom removal and critical safety shutdown steps.
Steps to relieve hydraulic pressure for tilt and extend cylinders.
Safety steps before servicing the intermediate boom section.
To Next Page
