Gehl RS6-34 - Page 43

RS5-34 Telescopic Handler ENGINE
PRINTED IN U.S.A. 201-13 913241
Alt
=
to
hide
template
information
Alt+ to display template information
Template
Name:
OML
_
2
_
col
907871E
Template Date: 1997_02_12
STEP 56
G0905122
Install the throttle cable mounting bracket (1) and the
upper housing bell bolts (2). Do not tighten at this
time.
STEP 57
G0605124
Install the center bolts, lock washers and lock nuts in
the two front engine mounts. Do not tighten the nuts
at this time.
STEP 58
G0905126
G0905122
Install the lower housing bell bolts. Torque all the
housing bell bolts to 40 to 45 lb.-ft. (54 to 61 Nm).
1
2
2
2
View thousands of Crane Specifications on FreeCraneSpecs.com
View thousands of Crane Specifications on FreeCraneSpecs.com